Door handles
easy to assemble, robust quality
12 Item(s)
-
Handle E300D satin stainless steel - bathroom with clip-on rosettes
UVP €65.95
€60.45Delivery time: 10 Days
-
Lever handle E900 satin stainless steel - multicoloured bezel with magnetic rose
UVP €71.45
€64.85Delivery time: 10 Days
-
Handle E900 stainless steel matt - bathroom with magnetic rose
UVP €87.95
€83.55Delivery time: 10 Days
-
Lever handle Verona ER37 stainless steel matt - 3-part rosettes
UVP €87.95
€84.65Delivery time: 10 Days
-
Lever handle Montana ER54 Kosmos black - 3-piece rosette set
UVP €105.55
€97.85Delivery time: 10 Days
-
Rhodos ER28 Kosmos handle black - bathroom 3-piece roses
UVP €109.95
€102.25Delivery time: 5 Days
-
Lever handle Verona ER37 satin stainless steel - bathroom 3-piece roses
UVP €109.95
€102.25Delivery time: 10 Days
-
Lever handle Seatle ER46Q satin stainless steel - square rosettes with plain bezel
UVP €116.55
€107.75Delivery time: 10 Days
-
Handle Montana ER54 Kosmos black - Bathroom 3-piece rosette set
UVP €120.95
€115.45Delivery time: 10 Days
-
Lever handle Seatle ER46Q satin stainless steel - bathroom square roses
UVP €127.55
€120.95Delivery time: 10 Days
-
-17 %Hinge for wooden doors 2-piece - suitable for black setsRequired for doors with standard 2-part hinge
UVP €32.95
€27.45Delivery time: 10 Days
-
Hinge for wooden doors 3-piece - suitable for black setsRequired for doors with standard 3-part hinge
UVP €65.95
€61.55Delivery time: 10 Days
Door handles from planeo: functional & decorative
Beautifully shaped door handles that blend harmoniously into the overall appearance of your room give a great first impression. planeo has a great range of robust door handles, from round, black matt to shiny silver. DIY fans will love the quick and uncomplicated fitting.
What should I bear in mind when installing a door handle?
First, make sure you have the following tools:
- A screwdriver to match the screws in the package, usually slotted or Phillips
- A cordless drill and wooden drill bit with the correct diameter for the door handles; also brackets, a centre punch and a hammer for marking the drilling points
- Safety goggles
Steps to fitting a door handle:
- To keep the door open, operate the closing mechanism. This will make it easier for you to work. Push the door handle through the lock of the element. Then slide the drilling template over the square, which is enclosed in the packaging.
- Once you have aligned the drilling template perfectly, use the centre punch to mark the drilling points. Repeat this process on the back of the door.
- Drill the first holes into the side of the door that will be opened. Place the drill with the correct diameter exactly on the grain. Now drill halfway through the door, to protect the upper material from tearing out. Do the same on the other side. For this, it is best to remove the door handle to create more space for working.
- Attach the rosettes and secure them with screws. Since these are small screws, it is advisable to use a screwdriver.
- Finally, attach the door handle. Insert the handle with the square from the inside of the room. Thanks to this procedure, the door can be opened if the door handle falls off. As a last step, tighten the grub screw on the side of the handle without the square.
Be careful to work very precisely when fitting the handles for doors to ensure that both holes match. Also remove any sawdust from the hole after you have drilled the holes.
Do you have any further questions on the subject? Contact us - our helpful service team will be happy to advise you!
Do you have questions?
Phone: +49 5222 960 4810
MO - FR 9am to 6pm
SA 9am to 2pm