Meister Laminate Classic convinces with good quality and high functionality. The floor coverings are both easy to clean and robust. The modern and at the same time natural look is also a decorative enrichment.
- Ecological & environmentally conscious Consisting of natural raw materials, laminate flooring is characterised by an optimal ecological balance. So they perform well in private households and in the commercial sector.
- uncomplicated & resilient If you are looking for a hard-wearing and uncomplicated floor covering, you are always well advised to choose laminate flooring from MEISTER. The versatile hard floors can cope with all the stresses and strains of everyday life. They cut a fine figure in the living room, bedroom and children's room as well as in commercial areas.
- Comfortable & easy to maintain
MEISTER is the quality brand for flooring from MeisterWerke Schulte GmbH, a family-owned company. The innovative sales brand based in Ruthen-Meiste is available exclusively from specialist retailers. The wide range of floors, panels and accessories for the wood and building materials traded by MEISTER enjoys great popularity throughout Europe.
| item no. | 6136006443 |
|---|---|
| Manufacturer | MEISTER |
| Length in mm | 1288 |
| Width in mm | 198 |
| Thickness in mm | 8 |
| Wear class | 32 Commercial (moderate) |
| installation pattern | Plank pattern (1-plank) |
| Installation type | click |
| Look | Wood effect |
| Wood type | Oak |
| Underfloor heating | suitable |
| Warranty | 20 Jahre Privat, 5 Jahre Gewerbe |
| Special features | Blue Angel, Damp-proof laminate |
| EAN | 4011138834609 |
| Click variant | UniClic |
| Collection | MeisterDesign |
| Collection variant | LC 150 |
| Colour | beige |
| Piece per package | 10 |
| Range of application | Residential, Commercial |
| Shipping group | M |
| Weight | 19,28 kg/Packing |
| suitable for | Bath, Kitchen, Bedroom & living room, Hallway & Corridor |
| Package Content | 2.55 m² |
|
Show all data ▼
|
|
| Downloads | |
Meister Laminate LC 150 - Technical data sheet EN
|
|
|
Meister Laminate LC 150 - Installation instruction EN
|
|
|
Meister Laminate LC 150 - Warranty conditions EN
|
|
We will help you with your questions!
A specialist adviser will be happy
to advise you personally.
☎ +49 5222 960 4810
Mon - Fri: 9am - 6pm
Sat: 9am - 2pm
Variant: DIY-Instruction
button
The substrate should be firm, even, clean, permanently dry, load-bearing, free of cracks and resistant to tension and compression. Any unevenness exceeding 3 mm must be sanded down and levelled with a floor levelling compound.
CAUTION: Never lay laminate over a soft subfloor, e.g. over carpet or on unsuitable underlays.
button
The planks should be stored horizontally in the room in which they are to be installed for approx. 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and it will not "work" as much after the installation.
button
Start by cleaning the surface to be laid with a hoover. Lay out the vapour barrier (for mineral subfloors) overlapping in the room. If the laminate flooring does not already have integrated impact sound insulation, we recommend that you lay the insulation butt to butt against the laying direction of the top covering and fix all overlaps with aluminium tape.
Before installation, it is imperative that you follow the official installation instructions that are included in each package, otherwise any warranty and guarantee claims will be void!
button
Tip: To achieve as uniform a floor appearance as possible, it is advisable to install panels mixed from different packages.
You should start laying in one corner (left) and starting from the wall. Lay the first panel with the tongue side facing the wall and place all the other panels against it. Depending on the collection, the next rows are first laid with the long side into the already lying planks and fastened by applying light pressure to the face side or first clicked in with the face side and the long side then clicks into place.
ATTENTION: A distance of approx. 10-15 mm must always be maintained between the floor covering and the wall as well as to all fixed components.
button
If possible, the last row should be half the width of the plank. To do this, please measure the exact width of the room before laying. Please also take note of the edge distances to the wall.
button
Finally, cut off the PE foil approx. 2 cm above the floor. The skirting boards can now be attached with a mounting adhesive or the special clips.
Material:
- Laminate
- Vapour barrier
- Aluminium tape
Tools:
- Cutter knife
- Pencil
- Hammer
- Tapping block
- Tape measure
- Spirit level
- Spacer
optional:
- Skirting boards
- PE film
Working time:
- For a room size of 15-20 m² approx. 4-5 hours.
Difficulty level:
- easy
button Buying laminate: What do I need to know?
button Laminate surfaces and structures
button Laminate format variations - what are my decor options?
button Impact sound insulation for parquet, vinyl and laminate - planeo silence
button Laying vinyl flooring, laminate or parquet on old carpet - is it possible?
button Laying laminate in tile look
button cheap laminate
button Subfloor testing before laying floor coverings
Individual offer?
Are you looking for a lower price? Just ask us for an individual offer!